Interchangable Belt "BORGIN" for Beltbuckles and clasps. Made of Buffalo-Leather, used look.  The beautiful and sturdy belt is made for you in-house with a lot of Handwork ! This interchangable belt ist for intergangeable buckles and is therefore delivered without a buckle so that you can use your favorite buckle! Three snap-fasteners make it easy to change your beltbuckles. Our Intechangeable belts are suitable for all interchangeable buckles with about 4cm, as they have a strapwidth of about 3,7cm.  We only offer the strap here, no buckles (you can find these in our other offers)! The classic and timeless design of our interchangeable belts suits men ans women! We only use highquality and relatively thik full-grain leather (thickness : 3-3.5mm) for our belts. This makes them extremely stable and simply looks great! The leather is tanned vegetable and has an elegant feel. PLEASE note our information on belt measurements: we offer theese belts from 70-120cm.  We measure the length from the leatherend to the middle hole minus 5cm (for the Buckle). Therefore the 110cm belt is alltogether 125cm long end to tip. As a standard, we punch the strap 7 times at a distance of 3cm.  We included a picture above for a better explanation. Cleaning tip: We apply a leather finish before shipping, bit bare leather should be lightly greases from time to time to maintain its suppleness. Any surface contamination can be cleaned with a damp cloth and neutral soap solution. NOTE: The color of the product may vary from that shown due to the natural materials used and screen settings. Materials: 100% Buffaloleather vegetable tanned, Pressbuttons: Iron responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

w3 315x350 Patch Coat of arms W3 with desired text Custom text patch W3 with up to three lines of text made in our house especially for you! It is made in our house especially for you! You have many different sizes to choose from above! Please also note our size chart, which you can find in the pictures! You can design the patch yourself above. Please note:   We adjust the font heights to your text → more letters, smaller font. Please pay attention to upper and lower case when entering the data, as we copy the text you send us. We do not save every order! We have several punchers (people who set our embroidery designs) who punch each item by hand, so there are often differences in the finish. But this is unavoidable because with as much variety as we have, it is impossible to automate it. If you would like to receive your item multiple times exactly as in this order, please send us a message after purchase. If you would like to have an item that has already been saved, please let us know after purchase by sending a message to the seller You can sew or iron the patch on. (Ironing is only possible on fabrics that are temperature-resistant. This is usually 100% cotton or viscose; synthetic fiber materials are not suitable) The surrounding frame is approx. 2.5-3mm thick and allows for easy sewing on.   Info: We use a special embroidery base for patches, which is durable but also easy to sew on!   Material: Embroidery base (fabric): 74% polyester, 26% cotton, adhesive 100% polyethylene, washable up to 60°C Fleece: polyester/wood pulp, washable up to 95°C Embroidery threads: 100% polyester, Ökotex Standard 100, washable up to 95°C Product therefore washable up to 60°C   Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de   Please note our legal information! Thank you.  

Kilt bag "Wolfszeit" made from green kilt fabric and genuine black leather This beautiful bag is made in-house with a lot of handcraft! We have branded the Wolfszeit logo on the front with laser engraving and highlighted it so that it really stands out. Inside, the kilt bag offers plenty of storage space with 3 compartments. We have attached a key ring, a short chain and a small carabiner so that you can secure your valuables. Two sturdy genuine leather loops are used to attach the bag to your belt. The bag is fastened with a leather drawstring on the inside and a toggle button with a sturdy leather loop on the outside. Size: approx. 15x13cm Material: Lid and back: 100% genuine cowhide Bag: fabric made of mixed fabric Bändel: 100% leather Button: brass The color of the product may differ from the picture due to the natural materials used and screen settings. You will receive only the kilt bag with your purchase. The contents in the photos are for illustrative purposes only!

Kilt bag "5 Elements" Made of red kilt fabric and genuine burgundy leather. This beautiful bag is handcrafted in-house! On the front, we have laser-engraved the 5 Elements motif. Inside, the kilt bag offers plenty of storage space with three compartments. To secure your valuables, we have attached a key ring, a short chain, and a small carabiner. Two sturdy genuine leather loops are used for attaching it to your belt. The bag has a leather drawstring inside and a Toggle button with a sturdy leather loop on the outside. Size: approx. 15 x 13 cm Material: Lid and back: 100% genuine cowhide Bag: Blended fabric Straps: 100% leather Button: Brass The color of the product may vary from the illustration due to the natural materials used and screen settings. You will receive only the kilt bag with your purchase. The contents in the photos are for illustrative purposes only!

Kilt bag "Thor" made of green kilt fabric and genuine black leather This beautiful bag is handcrafted in-house! On the front, we have the motif "Thor, the Protector" with laser engraving and elaborately whitewashed for a truly striking look. The kilt bag offers plenty of storage space inside with 3 compartments. To keep your valuables safe, we've attached a key ring, a short chain, and a small carabiner. Two sturdy genuine leather loops are used for attaching it to your belt. The bag can be closed with a leather drawstring inside and a toggle button with a sturdy leather loop on the outside. Size: approx. 15x13cm Material: Lid and back: 100% genuine cowhide Bag: Blended fabric Straps: 100% leather Button: Brass The color of the product may vary from the illustration due to the natural materials used and screen settings. You will receive only the kilt bag with your purchase. The contents in the photos are for illustrative purposes only!

Kilt bag "Mjölnir" made from red kilt fabric and genuine burgundy leather This beautiful bag is made in-house with a lot of handcraft! We have branded the Mjölnir on the front with laser engraving and whitewashed it so that it really stands out. Inside, the kilt bag offers plenty of storage space with 3 compartments. We have attached a key ring, a short chain and a small carabiner so that you can secure your valuables. Two sturdy genuine leather loops are used to attach the bag to your belt. The bag is fastened with a leather drawstring on the inside and a toggle button with a sturdy leather loop on the outside. Size: approx. 15x13cm Material: Lid and back: 100% genuine cowhide Pouch: fabric made of mixed fabric Bändel: 100% leather Button: brass The color of the product may differ from the picture due to the natural materials used and screen settings. You will receive only the kilt bag with your purchase. The contents in the photos are for illustrative purposes only!

Kilt bag "Mjölnir" made from blue kilt fabric and genuine black leather This beautiful bag is made in-house with a lot of handcraft! We have branded the Mjölnir on the front with laser engraving and whitewashed it so that it really stands out. Inside, the kilt bag offers plenty of storage space with 3 compartments. We have attached a key ring, a short chain and a small carabiner so that you can secure your valuables. Two sturdy genuine leather loops are used to attach the bag to your belt. The bag is fastened with a leather drawstring on the inside and a toggle button with a sturdy leather loop on the outside. Size: approx. 15x13cm Material: Lid and back: 100% genuine cowhide Pouch: fabric made of mixed fabric Bändel: 100% leather Button: brass The color of the product may differ from the picture due to the natural materials used and screen settings. You will receive only the kilt bag with your purchase. The contents in the photos are for illustrative purposes only!

Kilt bag "Wolf Woman" made from red kilt fabric and genuine burgundy leather This beautiful bag is made in-house with a lot of handcraft! We have branded a tribal and the text "Wolf Woman" with laser engraving on the front and highlighted it so that it really stands out. Inside, the kilt bag offers plenty of storage space with 3 compartments. We have attached a key ring, a short chain and a small carabiner so that you can secure your valuables. Two sturdy genuine leather loops are used to attach the bag to your belt. The bag is fastened with a leather drawstring on the inside and a toggle button with a sturdy leather loop on the outside. Size: approx. 15x13cm Material: Lid and back: 100% genuine cowhide Bag: fabric made of mixed fabric Bändel: 100% leather Button: brass The color of the product may differ from the picture due to the natural materials used and screen settings. You will receive only the kilt bag with your purchase. The contents in the photos are for illustrative purposes only!

Kilt bag "5 Elements" made of green kilt fabric and genuine black leather This beautiful bag is made in-house with a lot of handcraft! We have branded the 5 Elements motif on the front with laser engraving. Inside, the kilt bag offers plenty of storage space with 3 compartments. We have attached a key ring, a short chain and a small carabiner so that you can secure your valuables. Two sturdy genuine leather loops are used to attach the bag to your belt. The bag is fastened with a leather drawstring on the inside and a toggle button with a sturdy leather loop on the outside. Size: approx. 15x13cm Material: Lid and back: 100% genuine cowhide Bag: fabric made of mixed fabric Bändel: 100% leather Button: brass The color of the product may differ from the picture due to the natural materials used and screen settings. You will receive only the kilt bag with your purchase. The contents in the photos are for illustrative purposes only!

Kilt bag "Wolfszeit" made from red kilt fabric and genuine burgundy leather This beautiful bag is made in-house with a lot of handcraft! We have branded the Wolfszeit logo on the front with laser engraving and highlighted it so that it really stands out. Inside, the kilt bag offers plenty of storage space with 3 compartments. We have attached a key ring, a short chain and a small carabiner so that you can secure your valuables. Two sturdy genuine leather loops are used to attach the bag to your belt. The bag is fastened with a leather drawstring on the inside and a toggle button with a sturdy leather loop on the outside. Size: approx. 15x13cm Material: Lid and back: 100% genuine cowhide Bag: fabric made of mixed fabric Bändel: 100% leather Button: brass The color of the product may differ from the picture due to the natural materials used and screen settings. You will receive only the kilt bag with your purchase. The contents in the photos are for illustrative purposes only!

Kilt bag "Mjölnir" made of green kilt fabric and genuine black leather This beautiful bag is made in-house with a lot of handcraft! We have branded the Mjölnir with laser engraving on the front. Inside, the kilt bag offers plenty of storage space with 3 compartments. We have attached a key ring, a short chain and a small carabiner so that you can secure your valuables. two sturdy genuine leather loops are used to attach the bag to your belt. The bag is fastened with a leather drawstring on the inside and a toggle button with a sturdy leather loop on the outside. Size: approx. 15x13cm Material: Lid and back: 100% genuine cowhide Bag: fabric made of mixed fabric Bändel: 100% leather Button: brass The color of the product may differ from the picture due to the natural materials used and screen settings. You will receive only the kilt bag with your purchase. The contents in the photos are for illustrative purposes only!

Belt bag/kilt bag "5 Elements" made of blue kilt fabric and genuine black leather This beautiful bag is made in-house with a lot of handcraft! We have branded the 5 Elements motif on the front with laser engraving. Inside, the kilt bag offers plenty of storage space with 3 compartments. We have attached a key ring, a short chain and a small carabiner so that you can secure your valuables. Two sturdy genuine leather loops are used to attach the bag to your belt. The bag is fastened with a leather drawstring on the inside and a toggle button with a sturdy leather loop on the outside. Size: approx. 15x13cm Material: Lid and back: 100% genuine cowhide Bag: fabric made of mixed fabric Bändel: 100% leather Button: brass The color of the product may differ from the picture due to the natural materials used and screen settings. You will receive only the kilt bag with your purchase. The contents in the photos are for illustrative purposes only!

Kilt bag "Wolfszeit" made from blue kilt fabric and genuine black leather This beautiful bag is made in-house with a lot of handcraft! We have branded the Wolfszeit logo on the front with laser engraving and highlighted it so that it really stands out. Inside, the kilt bag offers plenty of storage space with 3 compartments. We have attached a key ring, a short chain and a small carabiner so that you can secure your valuables. Two sturdy genuine leather loops are used to attach the bag to your belt. The bag is fastened with a leather drawstring on the inside and a toggle button with a sturdy leather loop on the outside. Size: approx. 15x13cm Material: Lid and back: 100% genuine cowhide Bag: fabric made of mixed fabric Bändel: 100% leather Button: brass The color of the product may differ from the picture due to the natural materials used and screen settings. You will receive only the kilt bag with your purchase. The contents in the photos are for illustrative purposes only!

Kilt bag "Mjölnir" Made from red kilt fabric and genuine black leather. This beautiful bag is handcrafted in-house! On the front, we have laser-engraved Mjölnir and carefully whitened it to make it stand out. Inside, the kilt bag offers plenty of storage space with three compartments. To keep your valuables safe, we have attached a key ring, a short chain, and a small carabiner. Two sturdy genuine leather loops are used for attaching it to your belt. /> The bag can be closed with a leather drawstring inside and a toggle button with a sturdy leather loop on the outside. Size: approx. 15x13cm Material: Lid and back: 100% genuine cowhide Bag: Blended fabric Straps: 100% leather Button: Brass The color of the product may vary from the illustration due to the natural materials used and screen settings. You will receive only the kilt bag with your purchase. The content in the photos is for illustrative purposes only!

Kilt bag "Thor" made of red kilt fabric and genuine burgundy leather This beautiful bag is handcrafted in-house! On the front, we have the motif "Thor, the Protector" with laser engraving and elaborately whitewashed for a truly striking look. The kilt bag offers plenty of storage space inside with 3 compartments. To keep your valuables safe, we've attached a key ring, a short chain, and a small carabiner. Two sturdy genuine leather loops are used for attaching it to your belt. The bag can be closed with a leather drawstring inside and a toggle button with a sturdy leather loop on the outside. Size: approx. 15x13cm Material: Lid and back: 100% genuine cowhide Bag: Blended fabric Straps: 100% leather Button: Brass The color of the product may vary from the illustration due to the natural materials used and screen settings. You will receive only the kilt bag with your purchase. The contents in the photos are for illustrative purposes only!

b3_Set 35x14 Patch "Arch set B3" for your 2-line text It is made in our house especially for you! You have many different sizes to choose from above! Please also note our size chart, which you can find in the pictures! You can design the patch yourself above. Please note:   We adjust the font heights to your text → more letters, smaller font. Please pay attention to upper and lower case when entering the data, as we copy the text you send us. We do not save every order! We have several punchers (people who set our embroidery designs) who punch each item by hand, so there are often differences in the finish. But this is unavoidable because with as much variety as we have, it is impossible to automate it. If you would like to receive your item multiple times exactly as in this order, please send us a message after purchase. If you would like to have an item that has already been saved, please let us know after purchase by sending a message to the seller You can sew or iron the patch on. (Ironing is only possible on fabrics that are temperature-resistant. This is usually 100% cotton or viscose; synthetic fiber materials are not suitable) The surrounding frame is approx. 2.5-3mm thick and allows for easy sewing on.   Info: We use a special embroidery base for patches, which is durable but also easy to sew on!   Material: Embroidery base (fabric): 74% polyester, 26% cotton, adhesive 100% polyethylene, washable up to 60°C Fleece: polyester/wood pulp, washable up to 95°C Embroidery threads: 100% polyester, Ökotex Standard 100, washable up to 95°C Product therefore washable up to 60°C   Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de   Please note our legal information! Thank you.  

T-Shirt printet with VESPA COWBOYS - PONTEDERA in your size and colours. -Marterial : 100% Cotton -washable up to 30°C -do not tumble dry ! Attention : expite our normale Items the delivery oh this one will take up to 14 days.

T-Shirt printet with VESPA COWBOYS - PONTEDERA in your size and colours. -Marterial : 100% Cotton -washable up to 30°C -do not tumble dry ! Attention : expite our normale Items the delivery oh this one will take up to 14 days.

T-Shirt printet with VESPA COWBOYS - PONTEDERA in your size and colours. -Marterial : 100% Cotton -washable up to 30°C -do not tumble dry ! Attention : expite our normale Items the delivery oh this one will take up to 14 days.

w2 28x35 Patch Coat of arms W2 with desired text Custom text patch W2 with up to three lines of text made in our house especially for you! It is made in our house especially for you! You have many different sizes to choose from above! Please also note our size chart, which you can find in the pictures! You can design the patch yourself above. Please note:   We adjust the font heights to your text → more letters, smaller font. Please pay attention to upper and lower case when entering the data, as we copy the text you send us. We do not save every order! We have several punchers (people who set our embroidery designs) who punch each item by hand, so there are often differences in the finish. But this is unavoidable because with as much variety as we have, it is impossible to automate it. If you would like to receive your item multiple times exactly as in this order, please send us a message after purchase. If you would like to have an item that has already been saved, please let us know after purchase by sending a message to the seller You can sew or iron the patch on. (Ironing is only possible on fabrics that are temperature-resistant. This is usually 100% cotton or viscose; synthetic fiber materials are not suitable) The surrounding frame is approx. 2.5-3mm thick and allows for easy sewing on.   Info: We use a special embroidery base for patches, which is durable but also easy to sew on!   Material: Embroidery base (fabric): 74% polyester, 26% cotton, adhesive 100% polyethylene, washable up to 60°C Fleece: polyester/wood pulp, washable up to 95°C Embroidery threads: 100% polyester, Ökotex Standard 100, washable up to 95°C Product therefore washable up to 60°C   Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de   Please note our legal information! Thank you.  

w1 28x35 Patch Coat of arms W1 with desired text Custom text patch W1 with up to five lines of text made in our house especially for you! It is made in our house especially for you! You have many different sizes to choose from above! Please also note our size chart, which you can find in the pictures! You can design the patch yourself above. Please note:   We adjust the font heights to your text → more letters, smaller font. Please pay attention to upper and lower case when entering the data, as we copy the text you send us. We do not save every order! We have several punchers (people who set our embroidery designs) who punch each item by hand, so there are often differences in the finish. But this is unavoidable because with as much variety as we have, it is impossible to automate it. If you would like to receive your item multiple times exactly as in this order, please send us a message after purchase. If you would like to have an item that has already been saved, please let us know after purchase by sending a message to the seller You can sew or iron the patch on. (Ironing is only possible on fabrics that are temperature-resistant. This is usually 100% cotton or viscose; synthetic fiber materials are not suitable) The surrounding frame is approx. 2.5-3mm thick and allows for easy sewing on.   Info: We use a special embroidery base for patches, which is durable but also easy to sew on!   Material: Embroidery base (fabric): 74% polyester, 26% cotton, adhesive 100% polyethylene, washable up to 60°C Fleece: polyester/wood pulp, washable up to 95°C Embroidery threads: 100% polyester, Ökotex Standard 100, washable up to 95°C Product therefore washable up to 60°C   Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de   Please note our legal information! Thank you.  

b1_Set 400x125 Patch "Arch set B1" for your 1-line text It is made in our house especially for you! You have many different sizes to choose from above! Please also note our size chart, which you can find in the pictures! You can design the patch yourself above. Please note:   We adjust the font heights to your text → more letters, smaller font. Please pay attention to upper and lower case when entering the data, as we copy the text you send us. We do not save every order! We have several punchers (people who set our embroidery designs) who punch each item by hand, so there are often differences in the finish. But this is unavoidable because with as much variety as we have, it is impossible to automate it. If you would like to receive your item multiple times exactly as in this order, please send us a message after purchase. If you would like to have an item that has already been saved, please let us know after purchase by sending a message to the seller You can sew or iron the patch on. (Ironing is only possible on fabrics that are temperature-resistant. This is usually 100% cotton or viscose; synthetic fiber materials are not suitable) The surrounding frame is approx. 2.5-3mm thick and allows for easy sewing on.   Info: We use a special embroidery base for patches, which is durable but also easy to sew on!   Material: Embroidery base (fabric): 74% polyester, 26% cotton, adhesive 100% polyethylene, washable up to 60°C Fleece: polyester/wood pulp, washable up to 95°C Embroidery threads: 100% polyester, Ökotex Standard 100, washable up to 95°C Product therefore washable up to 60°C   Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de   Please note our legal information! Thank you.  

b2_Set 400x125 Patch "Arch set B2" for your 1-line text It is made in our house especially for you! You have many different sizes to choose from above! Please also note our size chart, which you can find in the pictures! You can design the patch yourself above. Please note:   We adjust the font heights to your text → more letters, smaller font. Please pay attention to upper and lower case when entering the data, as we copy the text you send us. We do not save every order! We have several punchers (people who set our embroidery designs) who punch each item by hand, so there are often differences in the finish. But this is unavoidable because with as much variety as we have, it is impossible to automate it. If you would like to receive your item multiple times exactly as in this order, please send us a message after purchase. If you would like to have an item that has already been saved, please let us know after purchase by sending a message to the seller You can sew or iron the patch on. (Ironing is only possible on fabrics that are temperature-resistant. This is usually 100% cotton or viscose; synthetic fiber materials are not suitable) The surrounding frame is approx. 2.5-3mm thick and allows for easy sewing on.   Info: We use a special embroidery base for patches, which is durable but also easy to sew on!   Material: Embroidery base (fabric): 74% polyester, 26% cotton, adhesive 100% polyethylene, washable up to 60°C Fleece: polyester/wood pulp, washable up to 95°C Embroidery threads: 100% polyester, Ökotex Standard 100, washable up to 95°C Product therefore washable up to 60°C   Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de   Please note our legal information! Thank you.  

1-piece back patch Odin on his throne Measuring 37cm x 29cm. Runic text: (above) Allfather's (below) Son (in a circle) Odin Father Raven God Wolf God Join me This patch is made especially for you! Made in Germany. Special embroidery base for patches made of a blended fabric that lasts a long time. Patch material: 74% polyester, 26% cotton, adhesive: 100% polyethylene, embroidery threads: 100% polyester

Embroidered patch, trapezoidal shape, extra large! 27x24cm !!! "Hugin and Munin" with the text: Hugin and Munin Odin's ravens fly busily in the night- bringing news, asking questions, whether the gods remembered you! This patch is made especially for you! Made in Germany The embroidery pattern is of VERY high quality, as you can see in the picture. Special embroidery base for patches made of a blended fabric that lasts a long time. Patch material: Base: 65% Polyester, 35% cotton Fleece: 100% polyester Embroidery threads: 100% polyester

Embroidered patch, trapezoidal shape, extra large! 27x24cm !!! "Hugin and Munin" with the text in Futark: Hugin and Munin Odin's ravens fly busily in the night - bringing news, asking questions, whether the gods remembered you! This patch is made especially for you! Made in Germany The embroidery pattern is of VERY high quality, as you can see in the picture. Special embroidery base for patches made of a blended fabric that lasts a long time. Patch material: Base: 65% Polyester, 35% cotton Fleece: 100% polyester Embroidery threads: 100% polyester

Absolutely high-quality leather belt handmade in Germany. Made in-house for you! This belt comes with a satin-finished buckle and is suitable for buckles and clasps. The three snap fasteners allow for easy replacement without any additional tools! We offer the belt, satin-finished buckle, and a leather shackle, but no buckles! Our leather belts are suitable for all interchangeable buckles with a width of approximately 4 cm, as they have a strap width of approximately 3.8 cm! The classic and timeless design Our leather belts fit men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and look simply great! The leather is vegetatively tanned and has a noble feel. Please note our information on belt sizes: We offer all buffalo leather belts in sizes from 70-120cm! We measure the length of the belt from the leather end to the middle hole minus 5 cm (buckle), see image. The 110 cm belt is therefore 130 cm long from the leather end to the tip. We punch the belt 7 times at 3 cm intervals as standard. For better explanation, we have included an image above! Cleaning Tip: We apply a leather finish before shipping, but bare leather should still be lightly re-greased from time to time to maintain its suppleness. Any surface dirt can be removed with a Clean with a damp cloth and neutral soap solution. Note: The color of the product may vary from the illustration due to the natural materials used and screen settings.

WOLFSZEIT® leather belt Alfrigg made of buffalo leather, with book screws, used look with high-quality buckle Material: Zinc alloy Surface finish: Nickel Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all buffalo leather belts from 70-120cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % buffalo leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

WOLFSZEIT® leather belt Alfrigg made of beef leather, with book screws, used look with high-quality buckle Material: Zinc alloy Surface finish: Antique silver Weight: 42 g Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all beef leather belts from 70-180cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % beef leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

WOLFSZEIT® leather belt Alfrigg made of buffalo leather, with book screws, used look with high-quality buckle Material: Zinc alloy Surface finish: Antique silver Weight: 42 g Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all buffalo leather belts from 70-120cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % buffalo leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

Rune bag -Triskele- Old World symbol Real Horn Runes Mystical & Powerful    Rune Pouch "Triskele" You have the choice! We offer it with runestones (in two sizes), but also on its own! The beautiful embroidered pouch and the buffalo horn runestones are handcrafted in-house! The runestones: They are either approximately 20x15mm or 30x20mm in size. They are cut in an irregular shape from water buffalo horn plates, so the stone size can vary by 1-2mm. If you choose a bag of runestones, you will receive 25 runestones. 24 runestones each display a rune symbol; the 25th stone is the Odin rune—so it is empty. We have laser-engraved the runes. The bag: /> This beautiful embroidered pouch is made of cowhide and linen. It has a diameter of 29.5 cm. The eyelets are provided with eyelets to ensure longevity. The high-quality embroidery features a triskele, the runes, and their names.      

Rune bag Yggdrasil - with or without runestones Rune Pouch "Yggdrasil" You have the choice! We offer it with runestones (in two sizes), but also on its own! The beautiful embroidered bag and the buffalo horn runestones are handcrafted in-house! The runestones: They are either approximately 20x15mm or 30x20mm in size. They are cut in an irregular shape from water buffalo horn plates, so the stone size can vary by 1-2 mm. If you choose a bag of runestones, you will receive 25 runestones. 24 runestones each display a runic symbol; the 25th stone is the Odin rune—it is therefore empty. We laser engraved the runes. The Pouch: This beautiful embroidered pouch is made of cowhide and linen. It has a diameter of 29.5 cm. The eyelets are provided with eyelets to ensure they last a long time. The high-quality embroidery consists of a Yggdrasil, a circle with the Nordic runes, and the saying "I am Yggdrasil, my roots reach to Jötunheim, Niflheim, and Asgard. Guard me well, for if I wither, Ragnarok will come."

T-Shirt printet with VESPA COWBOYS - PONTEDERA in your size and colours. -Marterial : 100% Cotton -washable up to 30°C -do not tumble dry ! Attention : expite our normale Items the delivery oh this one will take up to 14 days.

A pair of medium-sized Thor bracers. (2 pieces) The bracers are 22 cm high, measured from the lowest to the highest point! Made of brown buffalo leather with a used finish. Leather is a natural product and the color can vary between relatively light brown and relatively dark brown. The leather is bare leather with a thickness of approximately 4 mm and is very sturdy and durable. We engrave the bracers in-house with our own designed image of the god Thor. Therefore, they are NOT a mass-produced product! MADE IN GERMANY, no import. We adapt the image to the rails, that is, we mirror the image of Thor (the writing can of course be read on both rails) Unisex... suitable for men and women Leather size: M = at the wrist 13cm - elbow 19cm + lacing L = at the wrist 16cm - elbow 22cm + lacing Ergonomically shaped and fits very well on the arms. For lacing! At the lacing holes with "rust-proof" Equipped with eyelet rivets, looks better and is significantly more durable! Very sturdy, made of high-quality, robust leather, excellently crafted, handmade! Includes sturdy leather straps for lacing. We also offer this design here on Amazon in a shorter version (based on the total length) and as a single piece. You are purchasing 2 rails as shown in the picture!

T-Shirt printet with VESPA COWBOYS - PONTEDERA in your size and colours. -Marterial : 100% Cotton -washable up to 30°C -do not tumble dry ! Attention : expite our normale Items the delivery oh this one will take up to 14 days.

T-Shirt printet with VESPA COWBOYS - PONTEDERA in your size and colours. -Marterial : 100% Cotton -washable up to 30°C -do not tumble dry ! Attention : expite our normale Items the delivery oh this one will take up to 14 days.