WOLFSZEIT® leather belt Alfrigg made of buffalo leather, with book screws, used look with high-quality buckle Material: Zinc alloy Surface finish: Nickel Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all buffalo leather belts from 70-120cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % buffalo leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

WOLFSZEIT® leather belt Alfrigg made of buffalo leather, with book screws, used look with high-quality buckle Material: Zinc alloy Surface finish: Antique silver Weight: 42 g Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all buffalo leather belts from 70-120cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % buffalo leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

Absolutely high-quality leather belt handmade in Germany. Made in-house for you! This belt comes with a satin-finished buckle and is suitable for buckles and clasps. The three snap fasteners allow for easy replacement without any additional tools! We offer the belt, satin-finished buckle, and a leather shackle, but no buckles! Our leather belts are suitable for all interchangeable buckles with a width of approximately 4 cm, as they have a strap width of approximately 3.8 cm! The classic and timeless design Our leather belts fit men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and look simply great! The leather is vegetatively tanned and has a noble feel. Please note our information on belt sizes: We offer all buffalo leather belts in sizes from 70-120cm! We measure the length of the belt from the leather end to the middle hole minus 5 cm (buckle), see image. The 110 cm belt is therefore 130 cm long from the leather end to the tip. We punch the belt 7 times at 3 cm intervals as standard. For better explanation, we have included an image above! Cleaning Tip: We apply a leather finish before shipping, but bare leather should still be lightly re-greased from time to time to maintain its suppleness. Any surface dirt can be removed with a Clean with a damp cloth and neutral soap solution. Note: The color of the product may vary from the illustration due to the natural materials used and screen settings.

WOLFSZEIT® leather belt Alfrigg made of beef leather, with book screws, used look with high-quality buckle Material: Zinc alloy Surface finish: Antique silver Weight: 42 g Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all beef leather belts from 70-180cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % beef leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

Rune bag Yggdrasil - with or without runestones Rune Pouch "Yggdrasil" You have the choice! We offer it with runestones (in two sizes), but also on its own! The beautiful embroidered bag and the buffalo horn runestones are handcrafted in-house! The runestones: They are either approximately 20x15mm or 30x20mm in size. They are cut in an irregular shape from water buffalo horn plates, so the stone size can vary by 1-2 mm. If you choose a bag of runestones, you will receive 25 runestones. 24 runestones each display a runic symbol; the 25th stone is the Odin rune—it is therefore empty. We laser engraved the runes. The Pouch: This beautiful embroidered pouch is made of cowhide and linen. It has a diameter of 29.5 cm. The eyelets are provided with eyelets to ensure they last a long time. The high-quality embroidery consists of a Yggdrasil, a circle with the Nordic runes, and the saying "I am Yggdrasil, my roots reach to Jötunheim, Niflheim, and Asgard. Guard me well, for if I wither, Ragnarok will come."

Rune bag -Triskele- Old World symbol Real Horn Runes Mystical & Powerful    Rune Pouch "Triskele" You have the choice! We offer it with runestones (in two sizes), but also on its own! The beautiful embroidered pouch and the buffalo horn runestones are handcrafted in-house! The runestones: They are either approximately 20x15mm or 30x20mm in size. They are cut in an irregular shape from water buffalo horn plates, so the stone size can vary by 1-2mm. If you choose a bag of runestones, you will receive 25 runestones. 24 runestones each display a rune symbol; the 25th stone is the Odin rune—so it is empty. We have laser-engraved the runes. The bag: /> This beautiful embroidered pouch is made of cowhide and linen. It has a diameter of 29.5 cm. The eyelets are provided with eyelets to ensure longevity. The high-quality embroidery features a triskele, the runes, and their names.      

T-Shirt printet with VESPA COWBOYS - PONTEDERA in your size and colours. -Marterial : 100% Cotton -washable up to 30°C -do not tumble dry ! Attention : expite our normale Items the delivery oh this one will take up to 14 days.

Patch set "upper + lower wing S3" for your custom text (max. 2 lines) The lower line on the upper wing will be embroidered smaller! On the lower wing, the upper line is embroidered smaller! Made in our house especially for you! You have many different sizes to choose from above! Please see our table. Please note:   Only if we receive this information from you promptly can we produce your item quickly and correctly. We adjust the font heights to your text → More letters means smaller font. Please pay attention to upper and lower case when submitting your data, as we copy the text you submit. We do not save every order! We have several punchers (people who set our embroidery designs) who punch each item by hand, so there are often differences in the execution. However, this cannot be avoided because, with so much variety as we have, it is impossible to work automatically. If you would like to receive your item multiple times exactly as in this order, please indicate in your order that we should SAVE it! If you would like to have an item that has already been saved, please state this when ordering, as we cannot remember it!                                         Material: We use a special embroidery base for patches! Patch: 65% Polyester, 35% Cotton; Interlining: 100% Polyester; Embroidery threads: 100% polyester  

A pair of medium-sized Thor bracers. (2 pieces) The bracers are 22 cm high, measured from the lowest to the highest point! Made of brown buffalo leather with a used finish. Leather is a natural product and the color can vary between relatively light brown and relatively dark brown. The leather is bare leather with a thickness of approximately 4 mm and is very sturdy and durable. We engrave the bracers in-house with our own designed image of the god Thor. Therefore, they are NOT a mass-produced product! MADE IN GERMANY, no import. We adapt the image to the rails, that is, we mirror the image of Thor (the writing can of course be read on both rails) Unisex... suitable for men and women Leather size: M = at the wrist 13cm - elbow 19cm + lacing L = at the wrist 16cm - elbow 22cm + lacing Ergonomically shaped and fits very well on the arms. For lacing! At the lacing holes with "rust-proof" Equipped with eyelet rivets, looks better and is significantly more durable! Very sturdy, made of high-quality, robust leather, excellently crafted, handmade! Includes sturdy leather straps for lacing. We also offer this design here on Amazon in a shorter version (based on the total length) and as a single piece. You are purchasing 2 rails as shown in the picture!

29cm Patch Set, 6-piece + 1, Biker Patches, Custom Text, Design Your Own, for your Motorcycle Jacket, 6 Pieces   This set is made for you here in Marktbergel. It is perfect for motorcyclists, ATV, scooter, dirt bike, UTV, and quad owners. Included in the set: • 2 large patches (approx. 35 cm, 29 cm, or 25 cm wide each) - for a striking look • 2 name patches (approx. 10 x 3 cm each) - add your name or nickname to your outfit • 1 rectangular patch (approx. 6 x 4 cm) • 1 diamond-shaped patch (approx. 7.2 x 5 cm) •  The set is rounded off with a round "Made in Germany" patch with a diameter of approximately 4 cm.   This versatile set can be attached to jackets or vests and adds a personalized touch to your outfit.

T-Shirt printet with VESPA COWBOYS - PONTEDERA in your size and colours. -Marterial : 100% Cotton -washable up to 30°C -do not tumble dry ! Attention : expite our normale Items the delivery oh this one will take up to 14 days.

T-Shirt printet with VESPA COWBOYS - PONTEDERA in your size and colours. -Marterial : 100% Cotton -washable up to 30°C -do not tumble dry ! Attention : expite our normale Items the delivery oh this one will take up to 14 days.

T-Shirt printet with VESPA COWBOYS - PONTEDERA in your size and colours. -Marterial : 100% Cotton -washable up to 30°C -do not tumble dry ! Attention : expite our normale Items the delivery oh this one will take up to 14 days.

35cm Patch Set, 6-piece + 1, Biker Patches, Custom Text, Design Your Own, for your Motorcycle Jacket, 6 Pieces   This set is made for you here in Marktbergel. It is perfect for motorcyclists, ATV, scooter, dirt bike, UTV, and quad owners. Included in the set: • 2 large patches (approx. 35 cm, 29 cm, or 25 cm wide each) - for a striking look • 2 name patches (approx. 10 x 3 cm each) - add your name or nickname to your outfit • 1 rectangular patch (approx. 6 x 4 cm) • 1 diamond-shaped patch (approx. 7.2 x 5 cm) •  The set is rounded off with a round "Made in Germany" patch with a diameter of approximately 4 cm.   This versatile set can be attached to jackets or vests and adds a personalized touch to your outfit.

WOLFSZEIT® leather belt Alfrigg made of buffalo leather, with book screws, used look with high-quality buckle Material: stainless steel (AISI 304) Surface finishing: Polished Weight: 73g Breaking load: 500kg Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all buffalo leather belts from 70-120cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % buffalo leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

kreis 30x31 Custom Color Patch - personalized with your picture Only what is within the embroidered frame is printed! For logos we recommend a PNG without background. Alternatively, a pure black background for black fabric or a pure white background for white fabric. If you upload a full-surface image (e.g. your car/motorcycle in front of the garage), we recommend choosing white fabric. Here the image stands out more clearly. The free software “Inkscape”, for example, is suitable for editing your image (e.g. inserting text or removing the background). Material: Fabric - 80% cotton, 20% polyester Yarn of the frame - 100% polyester

T-Shirt printet with VESPA COWBOYS - PONTEDERA in your size and colours. -Marterial : 100% Cotton -washable up to 30°C -do not tumble dry ! Attention : expite our normale Items the delivery oh this one will take up to 14 days.

WOLFSZEIT® leather belt Alfrigg made of beef leather, with book screws, used look with high-quality buckle Material: stainless steel (AISI 304) Surface finishing: Polished Weight: 73g Breaking load: 500kg Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all beef leather belts from 70-180cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % beef leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

Embroidered patch, extra large! 27x23cm !!! "Hugin and Munin" This patch is made especially for you! Made in Germany This embroidery design has 65,000 stitches (no, we didn't make a typo :-)) and, as you can see from the picture, is VERY high-quality. Special embroidery base for patches and badges made of a durable blended fabric. Patch material: Base: 65% polyester, 35% cotton; Interfacing: 100% polyester; Embroidery threads: 100% polyester

Bomber jacket MA 1 ! Embroidered for you on the left chest! Size of the embroidery in one or two lines on the chest approx. 12 x 5 cm (is adjusted by us depending on the jacket size and text) ! Wind- and water-repellent reversible jacket in a traditional cut. Warm lining, a robust zipper and knitted cuffs make it a popular companion. - Heavy nylon twill - Reversible inner lining - Heavy brass zipper - 2 spacious side pockets with snap fasteners - Arm office with banknote compartment and pen holder - Fixed knitted cuffs on the collar and waistband - Extra long, tight-fitting sleeves - knitted cuffs - 2 Inner pockets. Outer material: 100% nylon. Inner lining: 100% nylon. Filling: 100% polyester.