WOLFSZEIT® leather belt Alfrigg made of buffalo leather, with book screws, used look with high-quality buckle Material: stainless steel (AISI 304) Surface finishing: Polished Weight: 73g Breaking load: 500kg Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all buffalo leather belts from 70-120cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % buffalo leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

WOLFSZEIT® leather belt Alfrigg made of buffalo leather, with book screws, used look with high-quality buckle Material: Zinc alloy Surface finish: Nickel Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all buffalo leather belts from 70-120cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % buffalo leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

WOLFSZEIT® leather belt Alfrigg made of buffalo leather, with book screws, used look with high-quality buckle Material: Zinc alloy Surface finish: Antique silver Weight: 42 g Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all buffalo leather belts from 70-120cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % buffalo leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

WOLFSZEIT® leather belt Alfrigg made of beef leather, with book screws, used look with high-quality buckle Material: stainless steel (AISI 304) Surface finishing: Polished Weight: 73g Breaking load: 500kg Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all beef leather belts from 70-180cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % beef leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

WOLFSZEIT® leather belt Alfrigg made of beef leather, with book screws, used look with high-quality buckle Material: Zinc alloy Surface finish: Antique silver Weight: 42 g Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all beef leather belts from 70-180cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % beef leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

WOLFSZEIT® Interchangable Belt "NABBI"  Made of Cow-Leather The beautiful and sturdy belt is made for you in-house with a lot of Handwork ! This interchangable belt is for intergangeable buckles and is therefore delivered without a buckle so that you can use your favorite buckle! To press studs make it easy th change your beltbuckles. Our Intechangeable belts are suitable for all interchangeable buckles with about 4cm, as they have a strapwidth of about 3,7cm.  We only offer the strap here, no buckles (you can find these in our other iffers)! The classic and timeless design of our interchangeable belts suits men ans women! We only use highquality and relatively thik full-grain leather (thickness : 3-3.5mm) for our belts. THis makes them extremely stable and simply looks great! The leather is tanned vegetable und has and has an elegant feel. PLEASE note our information on belt measurements: we offer theese belts from 70-190cm.  We measure the length from the leatherend to the middle hole minus 5cm (for the Buckle). Therefore the 110cm belt is alltogether 125cm long end to tip. As a standard, we punch the strap 7 times at a distance of 3cm.  We included a picture above for a better explanation. Cleaning tip: We apply a leather finish before shipping, bit bare leather should be lightly greases from time to time to maintain its suppleness. Any surface contamination can be cleaned with a damp cloth and neutral soap solution. NOTE: The color of the product may ary from that shown due to the natural materials used and screen settings. Material: 100% Cow-leather, vegetable tanned, snap fasteners: stainless steel responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

Wolfszeit® Interchangable Belt "IVALDI"  Made of Buffalo-Leather, used look.  The beautiful and sturdy belt is made for you in-house with a lot of Handwork ! This interchangable belt ist for intergangeable buckles and is therefore delivered without a buckle so that you can use your favorite buckle! Two bookscrews make it easy to change your beltbuckles. Our Intechangeable belts are suitable for all interchangeable buckles with about 4cm, as they have a strapwidth of about 3,7cm.  We only offer the strap here, no buckles (you can find these in our other offers)! The classic and timeless design of our interchangeable belts suits men ans women! We only use highquality and relatively thik full-grain leather (thickness : 3-3.5mm) for our belts. This makes them extremely stable and simply looks great! The leather is tanned vegetable and has an elegant feel. PLEASE note our information on belt measurements: we offer theese belts from 70-120cm.  We measure the length from the leatherend to the middle hole minus 5cm (for the Buckle). Therefore the 110cm belt is alltogether 125cm long end to tip. As a standard, we punch the strap 7 times at a distance of 3cm.  We included a picture above for a better explanation. Cleaning tip: We apply a leather finish before shipping, bit bare leather should be lightly greases from time to time to maintain its suppleness. Any surface contamination can be cleaned with a damp cloth and neutral soap solution. NOTE: The color of the product may ary from that shown due to the natural materials used and screen settings. Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

WOLFSZEIT® Interchangable Belt "DAINN"  Made of Buffalo-Leather, used look.  The beautiful and sturdy belt is made for you in-house with a lot of Handwork ! This interchangable belt ist for intergangeable buckles and is therefore delivered without a buckle so that you can use your favorite buckle! To press studs make it easy th change your beltbuckles. Our Intechangeable belts are suitable for all interchangeable buckles with about 4cm, as they have a strapwidth of about 3,7cm.  We only offer the strap here, no buckles (you can find these in our other iffers)! The classic and timeless design of our interchangeable belts suits men ans women! We only use highquality and relatively thik full-grain leather (thickness : 3-3.5mm) for our belts. THis makes them extremely stable and simply looks great! The leather is tanned vegetable und has and has an elegant feel. PLEASE note our information on belt measurements: we offer theese belts from 70-120cm.  We measure the length from the leatherend to the middle hole minus 5cm (for the Buckle). Therefore the 110cm belt is alltogether 125cm long end to tip. As a standard, we punch the strap 7 times at a distance of 3cm.  We included a picture above for a better explanation. Cleaning tip: We apply a leather finish before shipping, bit bare leather should be lightly greases from time to time to maintain its suppleness. Any surface contamination can be cleaned with a damp cloth and neutral soap solution. NOTE: The color of the product may ary from that shown due to the natural materials used and screen settings. Material: 100% buffalo leather, vegetable tanned, snap fasteners: stainless steel responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

Interchangable Belt "BORGIN" for Beltbuckles and clasps. Made of Buffalo-Leather, used look.  The beautiful and sturdy belt is made for you in-house with a lot of Handwork ! This interchangable belt ist for intergangeable buckles and is therefore delivered without a buckle so that you can use your favorite buckle! Three snap-fasteners make it easy to change your beltbuckles. Our Intechangeable belts are suitable for all interchangeable buckles with about 4cm, as they have a strapwidth of about 3,7cm.  We only offer the strap here, no buckles (you can find these in our other offers)! The classic and timeless design of our interchangeable belts suits men ans women! We only use highquality and relatively thik full-grain leather (thickness : 3-3.5mm) for our belts. This makes them extremely stable and simply looks great! The leather is tanned vegetable and has an elegant feel. PLEASE note our information on belt measurements: we offer theese belts from 70-120cm.  We measure the length from the leatherend to the middle hole minus 5cm (for the Buckle). Therefore the 110cm belt is alltogether 125cm long end to tip. As a standard, we punch the strap 7 times at a distance of 3cm.  We included a picture above for a better explanation. Cleaning tip: We apply a leather finish before shipping, bit bare leather should be lightly greases from time to time to maintain its suppleness. Any surface contamination can be cleaned with a damp cloth and neutral soap solution. NOTE: The color of the product may vary from that shown due to the natural materials used and screen settings. Materials: 100% Buffaloleather vegetable tanned, Pressbuttons: Iron responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

Wolfszeit® Interchangable Belt "ANDVARI"  Made of Buffalo-Leather, used look.  The beautiful and sturdy belt is made for you in-house with a lot of Handwork ! This interchangable belt ist for intergangeable buckles and is therefore delivered without a buckle so that you can use your favorite buckle! Two bookscrews make it easy to change your beltbuckles. Our Intechangeable belts are suitable for all interchangeable buckles with about 4cm, as they have a strapwidth of about 3,7cm.  We only offer the strap here, no buckles (you can find these in our other offers)! The classic and timeless design of our interchangeable belts suits men ans women! We only use highquality and relatively thik full-grain leather (thickness : 3-3.5mm) for our belts. This makes them extremely stable and simply looks great! The leather is tanned vegetable and has an elegant feel. PLEASE note our information on belt measurements: we offer theese belts from 70-120cm.  We measure the length from the leatherend to the middle hole minus 5cm (for the Buckle). Therefore the 110cm belt is alltogether 125cm long end to tip. As a standard, we punch the strap 7 times at a distance of 3cm.  We included a picture above for a better explanation. Cleaning tip: We apply a leather finish before shipping, bit bare leather should be lightly greases from time to time to maintain its suppleness. Any surface contamination can be cleaned with a damp cloth and neutral soap solution. NOTE: The color of the product may ary from that shown due to the natural materials used and screen settings. Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

Absolutely high-quality leather belt handmade in Germany. Made in-house for you! This belt comes with a satin-finished buckle and is suitable for buckles and clasps. The three snap fasteners allow for easy replacement without any additional tools! We offer the belt, satin-finished buckle, and a leather shackle, but no buckles! Our leather belts are suitable for all interchangeable buckles with a width of approximately 4 cm, as they have a strap width of approximately 3.8 cm! The classic and timeless design Our leather belts fit men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and look simply great! The leather is vegetatively tanned and has a noble feel. Please note our information on belt sizes: We offer all buffalo leather belts in sizes from 70-120cm! We measure the length of the belt from the leather end to the middle hole minus 5 cm (buckle), see image. The 110 cm belt is therefore 130 cm long from the leather end to the tip. We punch the belt 7 times at 3 cm intervals as standard. For better explanation, we have included an image above! Cleaning Tip: We apply a leather finish before shipping, but bare leather should still be lightly re-greased from time to time to maintain its suppleness. Any surface dirt can be removed with a Clean with a damp cloth and neutral soap solution. Note: The color of the product may vary from the illustration due to the natural materials used and screen settings.

Hier ist eine Beispiel Artikel Beschreibung. Dieser Text wird ganz einfach beim jeweiligen Artikel hinterlegt. Hier können alle Eigenschaften des Artikel hinterlegt werden, wie bspw. Material, Farbe, Länge, Breite, diverse Beschreibungen usw. Dieser Text dient lediglich als Platzhalter.

Rune bag Yggdrasil - with or without runestones Rune Pouch "Yggdrasil" You have the choice! We offer it with runestones (in two sizes), but also on its own! The beautiful embroidered bag and the buffalo horn runestones are handcrafted in-house! The runestones: They are either approximately 20x15mm or 30x20mm in size. They are cut in an irregular shape from water buffalo horn plates, so the stone size can vary by 1-2 mm. If you choose a bag of runestones, you will receive 25 runestones. 24 runestones each display a runic symbol; the 25th stone is the Odin rune—it is therefore empty. We laser engraved the runes. The Pouch: This beautiful embroidered pouch is made of cowhide and linen. It has a diameter of 29.5 cm. The eyelets are provided with eyelets to ensure they last a long time. The high-quality embroidery consists of a Yggdrasil, a circle with the Nordic runes, and the saying "I am Yggdrasil, my roots reach to Jötunheim, Niflheim, and Asgard. Guard me well, for if I wither, Ragnarok will come."

Rune bag -Triskele- Old World symbol Real Horn Runes Mystical & Powerful    Rune Pouch "Triskele" You have the choice! We offer it with runestones (in two sizes), but also on its own! The beautiful embroidered pouch and the buffalo horn runestones are handcrafted in-house! The runestones: They are either approximately 20x15mm or 30x20mm in size. They are cut in an irregular shape from water buffalo horn plates, so the stone size can vary by 1-2mm. If you choose a bag of runestones, you will receive 25 runestones. 24 runestones each display a rune symbol; the 25th stone is the Odin rune—so it is empty. We have laser-engraved the runes. The bag: /> This beautiful embroidered pouch is made of cowhide and linen. It has a diameter of 29.5 cm. The eyelets are provided with eyelets to ensure longevity. The high-quality embroidery features a triskele, the runes, and their names.      

Nickel-free belt made of brown buffalo leather This beautiful and sturdy belt is handcrafted in-house for you! We make the belt from buffalo hide and in your desired length! It is approx. 3.2 cm wide and is closed with a rectangular, smooth-surfaced belt buckle. Material: Zinc alloy Surface finish: Chrome-plated This buckle is nickel-free and should therefore be wearable for most allergy sufferers! The bracket made of the same material holds the strap securely. The buckle and brace are attached with two book screws, allowing for later shortening or replacing the buckle. We only use high-quality and relatively thick full-grain leather for our belts! /> This makes them extremely sturdy and looks simply fantastic! The leather is vegetable-tanned and has a refined feel. Please note our belt size information: We offer all cowhide belts from 70-190cm and all buffalo leather belts from 70-120cm! We measure the length of the belt from the leather end to the middle hole. The 110cm belt is therefore 130cm long from the leather end to the tip. /> We hole the belt 7 times as standard, spaced 3 cm apart. For better explanation, we've included an image above! Cleaning Tip: We apply a leather finish before shipping, but bare leather should still be lightly re-greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and a neutral soap solution. The color of the product may vary from the illustration due to the natural materials used and screen settings.

4-pack Leather straps made from genuine, brown and sturdy buffalo leather with a cast iron clasp! You can use the straps in a variety of ways! We offer you many sizes to choose from above! You will receive four identical straps in your chosen size! The straps are made of genuine full-grain leather, which is approx. 1.6 cm wide and approx. 3 mm thick. The clasp is a cast-iron, medieval buckle with a hammered effect. The strap is made by us with a lot of manual work and is perforated 5 times at 1cm intervals. The total length is calculated from the buckle to the last hole! The strap can therefore really be used up to the desired length, as the 20cm strap, for example, has a total length of 25cm!   Not your color? We offer all straps in black cowhide and brown buffalo leather... Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly re-greased from time to time to maintain its suppleness. Any surface soiling can be cleaned with a damp cloth and neutral soap solution. The color of the product may differ from the image due to the natural materials used and screen settings.

4-pack Leather straps made from genuine, brown and sturdy buffalo leather Buckle: Material: Zinc alloy Surface finish: Chrome-plated Weight: 11 g Breaking load: 120 kg You can use the straps in a variety of ways! We offer you many sizes to choose from above! You will receive four identical straps in your chosen size! The straps are made of genuine full-grain leather, which is approx. 1.6 cm wide and approx. 3 mm thick. The clasp is a cast-iron, medieval buckle with a hammered effect. The strap is made by us with a lot of manual work and is perforated 5 times at 1cm intervals. The total length is calculated from the buckle to the last hole! The strap can therefore really be used up to the desired length, as the 20cm strap, for example, has a total length of 25cm!   Not your color? We offer all straps in black cowhide and brown buffalo leather... Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly re-greased from time to time to maintain its suppleness. Any surface soiling can be cleaned with a damp cloth and neutral soap solution. The color of the product may differ from the image due to the natural materials used and screen settings.

2-pack Leather straps made from genuine, brown and sturdy buffalo leather with a cast iron clasp! You can use the straps in a variety of ways! We offer you many sizes to choose from above! You will receive four identical straps in your chosen size! The straps are made of genuine full-grain leather, which is approx. 1.6 cm wide and approx. 3 mm thick. The clasp is a cast-iron, medieval buckle with a hammered effect. The strap is made by us with a lot of manual work and is perforated 5 times at 1cm intervals. The total length is calculated from the buckle to the last hole! The strap can therefore really be used up to the desired length, as the 20cm strap, for example, has a total length of 25cm!   Not your color? We offer all straps in black cowhide and brown buffalo leather... Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly re-greased from time to time to maintain its suppleness. Any surface soiling can be cleaned with a damp cloth and neutral soap solution. The color of the product may differ from the image due to the natural materials used and screen settings.

2-pack Leather straps made from genuine, brown and sturdy buffalo leather Buckle: Material: Zinc alloy Surface finish: Chrome-plated Weight: 11 g Breaking load: 120 kg You can use the straps in a variety of ways! We offer you many sizes to choose from above! You will receive four identical straps in your chosen size! The straps are made of genuine full-grain leather, which is approx. 1.6 cm wide and approx. 3 mm thick. The clasp is a cast-iron, medieval buckle with a hammered effect. The strap is made by us with a lot of manual work and is perforated 5 times at 1cm intervals. The total length is calculated from the buckle to the last hole! The strap can therefore really be used up to the desired length, as the 20cm strap, for example, has a total length of 25cm!   Not your color? We offer all straps in black cowhide and brown buffalo leather... Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly re-greased from time to time to maintain its suppleness. Any surface soiling can be cleaned with a damp cloth and neutral soap solution. The color of the product may differ from the image due to the natural materials used and screen settings.

Hier ist eine Beispiel Artikel Beschreibung. Dieser Text wird ganz einfach beim jeweiligen Artikel hinterlegt. Hier können alle Eigenschaften des Artikel hinterlegt werden, wie bspw. Material, Farbe, Länge, Breite, diverse Beschreibungen usw. Dieser Text dient lediglich als Platzhalter.

Engraved drinking horn holder "Asgard" Made of genuine, brown buffalo leather with a used look. We engrave the horn holder on the front with the motif "Odin"! You can choose from 3 sizes: S - for horns with a capacity of 0.3-0.4L M - for horns with a capacity of 0.4-0.6L L - for horns with a capacity of 0.6-0.8L We design and produce all horn holders ourselves! To ensure that the drinking horn holders last a long time and are stable, we use approximately 3mm thick full-grain leather! Thanks to the lacing, the holder can be easily adjusted to your horn! For a great look, good quality, and durability, we use rust-proof brass rivets to close the lacing holes! The leather cord used has a diameter of approximately 2.5mm. You are purchasing a horn holder! Not a horn! Only the horn holder is included!

Engraved drinking horn holder "Asgard" Made of genuine, brown buffalo leather with a distressed look. We engrave the horn holder on the front with the words "Thor's Executioner" and "Mjölnir"! You can choose from 3 sizes: S - for horns with a diameter of 0.3-0.4L M - for horns with a diameter of 0.4-0.6L L - for horns with a diameter of 0.6-0.8L We design and produce all horn holders ourselves! To ensure the drinking horn holders last a long time and are sturdy, we use approximately 3mm thick full-grain leather! Thanks to the lacing, the holder can be easily adjusted to your horn! For a great look, good quality, and durability, we use rust-proof brass rivets to close the lacing holes! The leather cord used has a diameter of approximately 2.5mm. You are purchasing a horn holder! Not a horn! Only the horn holder is included!

Engraved drinking horn holder "Asgard" Made of genuine, brown buffalo leather with a used look. We engrave the horn holder on the front with a Mjölnir! You can choose from 3 sizes: S - for horns with 0.3-0.4L M - for horns with 0.4-0.6L L - for horns with 0.6-0.8L We design and produce all horn holders ourselves! To ensure that the drinking horn holders last a long time and are stable, we use approximately 3mm thick full-grain leather! Thanks to the lacing, the holder can be easily adjusted to your horn! For a great look, good quality, and durability, we use rust-proof brass rivets to close the lacing holes! The leather cord used has a diameter of approximately 2.5mm. You are purchasing a horn holder! Not a horn! Only the horn holder is included!

Wolf keychain with your desired text. This keychain is engraved in leather by us and cut to a perfect fit. We only use bare cowhide with a thickness of at least 3-4mm. Size: 3.5cm x 7cm (without key ring) It is fitted with a rust-proof (brass) rivet. and comes with a key ring. The keychain is made in-house especially FOR YOU after your purchase.

1.103 / 5.000 Engraved drinking horn holder made of genuine, brown buffalo leather with a used look We engraved the horn holder on the left side with a Mjölnir and on the right side with the saying "The Son of our God has a hammer, not a cross"! You have 3 sizes to choose from: S - for horns with 0.3-0.4L M - for horns with 0.4-0.6L L - for horns with 0.6-0.8L We design and produce all horn holders ourselves! To ensure the drinking horn holders are long-lasting and stable, we use approximately 3mm thick full-grain leather! Thanks to the lacing, the holder can be easily adjusted to your horn! For a great look, good quality, and durability, we close the lacing holes with rust-proof brass rivets! The leather cord used has a diameter of approximately 2.5mm. You are purchasing a horn holder! Not a horn! Only the horn holder is included!

Drinking horn holder "Flatter" Made of genuine, black cowhide You have 3 sizes to choose from: S - for horns with 0.3-0.4L M - for horns with 0.4-0.6L L - for horns with 0.6-0.8L We design and produce all horn holders ourselves! To ensure the drinking horn holders last a long time and are stable, we use approximately 3mm thick full-grain leather! Thanks to the lacing, the holder can be easily adjusted to your horn! For a great For a look, good quality, and durability, we close the cord holes with rust-proof brass rivets! The leather cord used has a diameter of approximately 2.5mm. You are purchasing a horn holder! No horn! Only the horn holder is included!

Gravierter und bemalter Trinkhornhalter aus echtem, schwarzen Rindleder Wir haben den Hornhalter auf der linken Seite mit einem Mjölnir und auf der rechten Seite mit dem Spruch "Der Sohn unseres Gottes hat einen Hammer kein Kreuz" graviert und weiß bemalt! Du hast 3 Größen zur Auwahl: S - für Hörner mit 0,3-0,4L M - für Hörner mit 0,4-0,6L L - für Hörner mit 0,6-0,8L Wir entwerfen und produzieren alle Hornhalter selbst! Damit die Trinkhornhalter lange halten und stabil sind verwenden wir ca. 3mm dickes Vollleder! Aufgrund der Schnürung lässt sich der Halter gut an Dein Horn anpassen! Für eine tolle Optik, gute Qualität und Langlebigkeit ösen wir die Schnürlöcher mit Lochnieten aus nicht rostendem Messing! Die verwendete Lederschnur hat einen Durchmesser von ca. 2,5mm. Du kaufst hier einen Hornhalter! Kein Horn! Es wird nur der Hornhalter geliefert!

Blobb drink holder this was designed by us and is handmade in our company. suitable for bottles and cups up to approx. 0.5 liters Made of smooth cowhide with a thickness of approx. 3mm. For lacing. Equipped with rivets at the lacing holes, looks better and can hold significantly more! Suitable for belts up to 5cm wide.

25 runes in a cotton bag Runestones irregularly cut and engraved from water buffalo horn plates. Therefore, the stone sizes vary by 1-2mm. Available in two sizes: small stones approximately 20x15mm; large stones approximately 30x20mm. The cotton bag is printed by us.

25 genuine leather rune stones in a cotton bag The leather runes are hexagonal in shape, they measure 3.5 cm x 3.5 cm, and the leather is approximately 3-4 mm thick. We used Futhark as the runic script and hand-painted the individual runes before engraving them onto the leather. After engraving, we grease them, making them very comfortable to hold. The cotton bag is printed by us.