Drinking horn holder "Flatter" Made of genuine, black cowhide You have 3 sizes to choose from: S - for horns with 0.3-0.4L M - for horns with 0.4-0.6L L - for horns with 0.6-0.8L We design and produce all horn holders ourselves! To ensure the drinking horn holders last a long time and are stable, we use approximately 3mm thick full-grain leather! Thanks to the lacing, the holder can be easily adjusted to your horn! For a great For a look, good quality, and durability, we close the cord holes with rust-proof brass rivets! The leather cord used has a diameter of approximately 2.5mm. You are purchasing a horn holder! No horn! Only the horn holder is included!

Engraved drinking horn holder "Asgard" Made of genuine, brown buffalo leather with a used look. We engrave the horn holder on the front with the motif "Odin"! You can choose from 3 sizes: S - for horns with a capacity of 0.3-0.4L M - for horns with a capacity of 0.4-0.6L L - for horns with a capacity of 0.6-0.8L We design and produce all horn holders ourselves! To ensure that the drinking horn holders last a long time and are stable, we use approximately 3mm thick full-grain leather! Thanks to the lacing, the holder can be easily adjusted to your horn! For a great look, good quality, and durability, we use rust-proof brass rivets to close the lacing holes! The leather cord used has a diameter of approximately 2.5mm. You are purchasing a horn holder! Not a horn! Only the horn holder is included!

Hier ist eine Beispiel Artikel Beschreibung. Dieser Text wird ganz einfach beim jeweiligen Artikel hinterlegt. Hier können alle Eigenschaften des Artikel hinterlegt werden, wie bspw. Material, Farbe, Länge, Breite, diverse Beschreibungen usw. Dieser Text dient lediglich als Platzhalter.

Gravierter und bemalter Trinkhornhalter aus echtem, schwarzen Rindleder Wir haben den Hornhalter auf der linken Seite mit einem Mjölnir und auf der rechten Seite mit dem Spruch "Der Sohn unseres Gottes hat einen Hammer kein Kreuz" graviert und weiß bemalt! Du hast 3 Größen zur Auwahl: S - für Hörner mit 0,3-0,4L M - für Hörner mit 0,4-0,6L L - für Hörner mit 0,6-0,8L Wir entwerfen und produzieren alle Hornhalter selbst! Damit die Trinkhornhalter lange halten und stabil sind verwenden wir ca. 3mm dickes Vollleder! Aufgrund der Schnürung lässt sich der Halter gut an Dein Horn anpassen! Für eine tolle Optik, gute Qualität und Langlebigkeit ösen wir die Schnürlöcher mit Lochnieten aus nicht rostendem Messing! Die verwendete Lederschnur hat einen Durchmesser von ca. 2,5mm. Du kaufst hier einen Hornhalter! Kein Horn! Es wird nur der Hornhalter geliefert!

1.103 / 5.000 Engraved drinking horn holder made of genuine, brown buffalo leather with a used look We engraved the horn holder on the left side with a Mjölnir and on the right side with the saying "The Son of our God has a hammer, not a cross"! You have 3 sizes to choose from: S - for horns with 0.3-0.4L M - for horns with 0.4-0.6L L - for horns with 0.6-0.8L We design and produce all horn holders ourselves! To ensure the drinking horn holders are long-lasting and stable, we use approximately 3mm thick full-grain leather! Thanks to the lacing, the holder can be easily adjusted to your horn! For a great look, good quality, and durability, we close the lacing holes with rust-proof brass rivets! The leather cord used has a diameter of approximately 2.5mm. You are purchasing a horn holder! Not a horn! Only the horn holder is included!

Engraved drinking horn holder "Asgard" Made of genuine, brown buffalo leather with a used look. We engrave the horn holder on the front with a Mjölnir! You can choose from 3 sizes: S - for horns with 0.3-0.4L M - for horns with 0.4-0.6L L - for horns with 0.6-0.8L We design and produce all horn holders ourselves! To ensure that the drinking horn holders last a long time and are stable, we use approximately 3mm thick full-grain leather! Thanks to the lacing, the holder can be easily adjusted to your horn! For a great look, good quality, and durability, we use rust-proof brass rivets to close the lacing holes! The leather cord used has a diameter of approximately 2.5mm. You are purchasing a horn holder! Not a horn! Only the horn holder is included!

Engraved drinking horn holder "Asgard" Made of genuine, brown buffalo leather with a distressed look. We engrave the horn holder on the front with the words "Thor's Executioner" and "Mjölnir"! You can choose from 3 sizes: S - for horns with a diameter of 0.3-0.4L M - for horns with a diameter of 0.4-0.6L L - for horns with a diameter of 0.6-0.8L We design and produce all horn holders ourselves! To ensure the drinking horn holders last a long time and are sturdy, we use approximately 3mm thick full-grain leather! Thanks to the lacing, the holder can be easily adjusted to your horn! For a great look, good quality, and durability, we use rust-proof brass rivets to close the lacing holes! The leather cord used has a diameter of approximately 2.5mm. You are purchasing a horn holder! Not a horn! Only the horn holder is included!