Nickel-free belt made of brown buffalo leather This beautiful and sturdy belt is handcrafted in-house for you! We make the belt from buffalo hide and in your desired length! It is approx. 3.2 cm wide and is closed with a rectangular, smooth-surfaced belt buckle. Material: Zinc alloy Surface finish: Chrome-plated This buckle is nickel-free and should therefore be wearable for most allergy sufferers! The bracket made of the same material holds the strap securely. The buckle and brace are attached with two book screws, allowing for later shortening or replacing the buckle. We only use high-quality and relatively thick full-grain leather for our belts! /> This makes them extremely sturdy and looks simply fantastic! The leather is vegetable-tanned and has a refined feel. Please note our belt size information: We offer all cowhide belts from 70-190cm and all buffalo leather belts from 70-120cm! We measure the length of the belt from the leather end to the middle hole. The 110cm belt is therefore 130cm long from the leather end to the tip. /> We hole the belt 7 times as standard, spaced 3 cm apart. For better explanation, we've included an image above! Cleaning Tip: We apply a leather finish before shipping, but bare leather should still be lightly re-greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and a neutral soap solution. The color of the product may vary from the illustration due to the natural materials used and screen settings.

WOLFSZEIT® leather belt Alfrigg made of buffalo leather, with book screws, used look with high-quality buckle Material: Zinc alloy Surface finish: Nickel Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all buffalo leather belts from 70-120cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % buffalo leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

Absolutely high-quality leather belt handmade in Germany. Made in-house for you! This belt comes with a satin-finished buckle and is suitable for buckles and clasps. The three snap fasteners allow for easy replacement without any additional tools! We offer the belt, satin-finished buckle, and a leather shackle, but no buckles! Our leather belts are suitable for all interchangeable buckles with a width of approximately 4 cm, as they have a strap width of approximately 3.8 cm! The classic and timeless design Our leather belts fit men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and look simply great! The leather is vegetatively tanned and has a noble feel. Please note our information on belt sizes: We offer all buffalo leather belts in sizes from 70-120cm! We measure the length of the belt from the leather end to the middle hole minus 5 cm (buckle), see image. The 110 cm belt is therefore 130 cm long from the leather end to the tip. We punch the belt 7 times at 3 cm intervals as standard. For better explanation, we have included an image above! Cleaning Tip: We apply a leather finish before shipping, but bare leather should still be lightly re-greased from time to time to maintain its suppleness. Any surface dirt can be removed with a Clean with a damp cloth and neutral soap solution. Note: The color of the product may vary from the illustration due to the natural materials used and screen settings.

WOLFSZEIT® leather belt Alfrigg made of beef leather, with book screws, used look with high-quality buckle Material: Zinc alloy Surface finish: Antique silver Weight: 42 g Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all beef leather belts from 70-180cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % beef leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

WOLFSZEIT® leather belt Alfrigg made of buffalo leather, with book screws, used look with high-quality buckle Material: Zinc alloy Surface finish: Antique silver Weight: 42 g Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all buffalo leather belts from 70-120cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % buffalo leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

WOLFSZEIT® leather belt Alfrigg made of buffalo leather, with book screws, used look with high-quality buckle Material: stainless steel (AISI 304) Surface finishing: Polished Weight: 73g Breaking load: 500kg Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all buffalo leather belts from 70-120cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % buffalo leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de

WOLFSZEIT® leather belt Alfrigg made of beef leather, with book screws, used look with high-quality buckle Material: stainless steel (AISI 304) Surface finishing: Polished Weight: 73g Breaking load: 500kg Made in-house for you! The two book screws make it easy to replace the buckle. Our leather belts are suitable for all belt buckles with approx. 4 cm, as they have a belt width of approx. 3.7 cm! The classic and timeless design of our leather belts suits both men and women! We only use high-quality and relatively thick full-grain leather (thickness: 3.0 - 3.5mm) for our belts! This makes them extremely sturdy and they simply look great! The leather is vegetable tanned and has an elegant feel. We offer all beef leather belts from 70-180cm! Please note our instructions on belt measurements: We measure the length of the belt from the buckle to the center hole. The 110cm belt is therefore 130cm long from the buckle (incl. buckle) to the end of the leather. We punch the belt 7 times at 3cm intervals as standard. We have included a picture above for a better explanation! Cleaning tip: We apply a leather finish before shipping, however, blank leather should be lightly greased from time to time to maintain its suppleness. Any surface dirt can be cleaned with a damp cloth and neutral soap solution. Note: The color of the product may differ from the image due to the natural materials used and screen settings. Materials : 100 % beef leather vegetable tanned, book screws : brass Responsible person within the EU: Sabine Freiwang-Klug, 91613 Marktbergel, Tel.+49 (0)9843-9366464, mail: info@smart-outdoor.de